Goodman GMS80903BNA Heater "blocked flue" Questions

Ad

...flue to see if it is blocked or even partially blocked. This type of flue assembly exhausts burnt gases from the heater and another section draws fresh air in to the heater to be mixed and burnt with ...

Ad

...to room . this is first time this has happened after fitting new flue linner ten years ago could be some thing in the fire burning , or a blocked flue or linner could be split needs to be checked ...

Ad

flue is blocked fumes would come back down the flue and smother the flame on the water heater ? so pilot going out could be blocked pilot or thermocouple not working what is the make and model of your

Question about Dayton Heating & Cooling

1 Answer

...flue blocked, or induction is blocked from switch or housing. One other possibility would be a dirty/clogged a coil which isn't allowing sufficient air to push out causing the limit to trip. I hope ...

...blocked off fireplace & keeps turning off as the fireplace gets too hot when the rest of the room is still cold. Can I move it forwards into the room - what is the maximum flue you can have from ...

Question about Dyna-Glo Heating & Cooling

1 Answer

...blocked. If flue looks good i would try cleaning or replace thermalcoupl. Most of the dyna glo heater i have worked on have a thermal pile instead of thermalcoupl. If you have a thermal pile then i ...

Question about Rinnai Heating & Cooling

1 Answer

my rinnai 1004 keep shuting off and is blinking 14 CODE DISPLAYED FAULT REMEDY 11 Ignition Failure Check that gas is turned ON. Service call if repeated. 12 Flame Failure Check that gas is turned ON. ...

Question about Rinnai Heating & Cooling

1 Answer

my Rinnai 1004F giving me error code 99 My Rinnai 1004F direct-vent wall furnace is giving me error code 99. it won't light up.? Mfr Manual says of the error code 99: Flue Block Check around the flue ...

Question about Goodman Heating & Cooling

1 Answer

What does it mean to check the flue for blockage? A flue is the chimney, exhaust tube, or other conduit provided for the products of combustion to pass through safely from the combustion chamber to ...

Question about Rinnai Heating & Cooling

1 Answer

I have a nat gas furnace that has 5 flashes on the board and will not light Check for error code and check filters are not blocked and you have correct pressures. Make sure flue is not blocked

Not finding what you are looking for?
Heating & Cooling Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Goodman Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a Goodman Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...