...doesnt stop...sanded igniter stick and nothing happend. flashes red once. Do you see the actual ignitor glow? You must be saying that you sanded the sensor. The ignitor, after the little inducer fan ...
Furnace ignitor comes on glows little red gas comes on doesnt ignite gas shuts off ignitor comes back on glows bright orange gas comes on and ignites. It started doing this right after I replaced the ...
Question about Heating & Cooling
...glow and then go out without igniting. I will then have to open the furnace and press the reset button for it to work. This occurs very randomly. Furnace will work fine for a week or two, and then I ...
...is shuttng off to soon for it to ignite the gas. I cleaned the flame sensor but no change. Any suggestions? hot surface igniter may be weak. if it doesnt get hot enough it will not ignite the ...
Question about Heating & Cooling
...what do I do and what is going on with it? I get ignition glow but it doesnt light like getting no gas gas valve maybe open when it shouldn't be. coils inside gas valve may be shot. or board ...
...igniter doesnt glow orange. COMMON PROBLEM THE UNIT MAY HAVE A BAD HOT SURFACE IGNITOR .... these often go bad... if you have avolt meter unplug the ignitor and turn heater on see if you are getting ...
...doesnt succeed. If you stand in front of the furnace while it is coming on, you will be able to hear the problem. If its an electronic start, there will be a clicking sound, followed by the gas valve ...
...doesnt ignite, sounds like its in the start up stage & trys to go to flame on stage, but nothing happens, heard a click or 2, but no heat, Help ! ! ! please Does the hot surface igniter glow? If ...
igniter . If the igmitor doesnt glow it is probably cracked. If it is a spark ignition or in both cases check for a flame rollout switch located ontop of the burners should have a little reset button.
5 questions posted
Usually answered in minutes!
1,056 Questions
416 Questions
195 Questions
147 Questions
138 Questions