Polaroid FLM-2011 Television "tv eeprom faults" Questions

eeprom problem as others are experiencing? If the TV has picture, and only sound is absent, check its speaker first. There is nothing fault with its EEPROM. The fault should be either to its speaker/s

...TV not turning on. But, I can get the replacement EEPROM E110808. This part is an MX25L3206E made by MACRONIX. My question is, which component on the main board is the EEPROM? There are only 5, 8-pin ...

...Plasma TV.,but the sound goes off or it goes top volume by itself.Please help. EEPROM chip fault. Replace it. Contact any service technician. Check the data bus to it for any interruption. Electro ...

...tv have standby fault.. so here they are,! 1.)main av board ---the 8 leg eeprom loses programing just under LVD CABLE TO SCREEN -£14.99 from a guy or if you can program yourself 4.99 for the ...

...TV is turned on via remote/power button, the screen does not light up but the standby light goes away. I started with measuring the voltages on power supply board. AC input110V and output to main ...

eeprom re-set sounds complicated?. many thanks IF THETWO BLOWN CAPS WERE IN YOUR POWER SUPPLY REPLSCE THE POWER SUPPLY SOMETIMES EVEN WHEN WE CHANGE THE CAP THE POWER SUPPLY IS BAD capacitors supplied

...EEprom may be scrambled because of electrical discharges. Google "Capacitor bulge" and then search Youtube for your make and model to see if anyone has done an instructional video. You'll need to be ...

...TV turns on for about 30seconds and then turns off by itself. I just installed the power board (0500-0513-1140) (N312a001L) I still have the same problem. I was hoping it was a bad relay on the power ...

tv model no le40r88bd which have had for approx 2 years. Had developed a fault(red light flashing and ticking noise which was put down to a faulty power supply which we have had repaired at a cost of

...eeprom as it stores the fault in it's memory, It is located on the RF board which is the largest board on the tv. The chip is on the reverse of the board towards the top left as you look at it before ...