Microsoft Xbox 360 Console "freezes startup" Questions

freezes with no alert after startup, different discs freeze at different places consistently. the date and time are current, it hasn't overheated. there is no display or alert or message when the ...

startup splash screen freeze. I repaired my xbox 360 with the 3redlightfix.com proceedure and brought it back to life, but when at bootup the screen freezes.The light stays green and no red lights. u ...

freezes in the startup screen. my xobx freezes in the startup screen when the hard drive is in place, if the hard drive is not in place the xbox starts normally. what is the problem? There is probably

My Xbox 360 keeps freezing at the startup screen and will not go any farther. I do not understand why it is doing this. What should I do? Also, I am unable to connect to a couple of my friends, but I ...

startup. Alex, My xbox won't boot up. The splash screen freezes half way thru. I replaced the cables and the hard drive. When I took it to the store today it booted up fine. Any thoughts? you tried it

...freezes upon startup and makes a clicking noise The freeze ups normally happen before the red lights of doom and they are caused by the GPU and the CPU getting too hot and the soldering snaps off so ...

...freezes on logo screen during startup. Will eventually boot after 5 or 6 restarts The freeze ups normally happen before the red lights of doom and they are caused by the GPU and the CPU getting too ...

...Freezes at startup The main screen starts, then it freezes. I have replaced the cables and bought a new hard drive. I took it to the store and it worked fine there You might check out the Informative ...

my xbox 360 is stuck on startup screen. Freezing is a common problem due to overheating.  I would not be surprised if you get a 1 RED LIGHT or error such as E74 or 3 RED LIGHTS in the near future

...freezes a few minutes in.Next time maybe at startup. Sometimes the screen is burnt in even after i turn off the console. I have to un plug it from the wall. I cleaned the heat sinks and reapplied ...