Pioneer VSX-33TX Receiver "test speaker ohm meter" Questions

...test) Now touch each of the two speaker terminals with one of the meter leads (the meter must be set to OHMS or RESISTANCE during this test for proper reading). The resistance reading observed should ...

...speaker. If you have an ohm meter you can use that to test the impedance on your speakers. After disconnecting the speaker - touch the red lead to one connector and the black lead to the other. If it ...

...test your speaker, you will need a multimeter. Set it to ohms resistance and touch the speaker terminals, if there is a short internally the meter will read "1......" If it's an analog meter, it will ...

test with the speaker wires connected to the speakers (but still not connected to the amplifier). You should see a reading greater than 4 ohms (and most likely less than 8 ohms) on each set of speaker

yamaha speaker not working have you tested speakers with a multi meter on ohms ?

...test your speaker, you will need a multimeter. Set it to ohms resistance and touch the speaker terminals, if there is a short internally the meter will read "1......" If it's an analog meter, it will ...

...test which of the speaker is erring: connect an analog continuity tester (VOM) set to XI to the speaker wires. Measure the resistance which should be 8 ohms as you described. Move the cone, push the ...

...test your speaker, you will need a multimeter. Set it to ohms resistance and touch the speaker terminals, if there is a short internally the meter will read "1......" If it's an analog meter, it will ...

...test your speaker, you will need a multimeter. Set it to ohms resistance and touch the speaker terminals, if there is a short internally the meter will read "1......" If it's an analog meter, it will ...

...test each one. they should each read above 4 ohms. if you don't have a meter, you can use the following method although it is less effective. start connecting the speakers one at a time. turn up the ...