Jandy POOL PUMP IMPELLER ASSY PLUS HP STEALTH R0445304 "stealth" Questions

Jandy/Stealth Pool Pump motot We have a Jandy Stealth pool 1.0 hp pump motor (Stealth/Jandy model#jhp1.0 serial #D03FC1186...it runs great when the basket area on it is full of water so u can not see ...

breaker for my Jandy stealth tripped and wont stay on, the pump makes a bussing sound, wont move Start/run capacitor may be faulty ...

having problems with jandy stealth pump for my pool. it doesn't go it high speed need new 2 speed relay

Jandy stealth pump low pressure check to see if impeller is clogged

is there a reset button for a jandy stealth 1.5HP pool pump it kicks out breaker try turning the motor shaft if still doesnt work need new motor

Our Jandy 2 hp is too loud it's always running at over 100 decibles Noise level too high all of the time 2 hp stealth sounds like bad bearings need new motor

Jandy Stealth wired internally for 220V. There are three available terminals, the "A", the "B" or the L1 but I only have two red wires. Where do they go? look at the schematic on ...

I have a Jandy stealth series pump and this morning it was not running. The breaker was tripped and when I reset it and turned it on the motor only hums for a few seconds and then the breaker trips ...

not sure how spring loaded seal is installed, o ring in or out . http://www.vincentpm.com/DocumentControl/H0573800.pdf page 15

Just refilled pool, pump is less than 10 on the gauge, in floor cleaner 5psi Check your suction piping all the way to the pump for a blockage