Echo Gas Blower 162 MPH 450 CFM Blower PB500H "leaf start fuel" Questions

leaf blower and it won't start. Has good compression most likley a fuel problem, start by replacing the fuel lines, fuel filter and diaphragm and gasket set in the carb. Non use is the worst thing for

...leaf vac. Why won't it start? probably a bad plug or carbon across the plug gap Can also be a fuel problem. These machines do not like gasoline containing ethanol. Try some pure gasoline. Also, ...

...fuel filter. If the fuel filter is clogged, it willrestrict the flow of fuel to the carburetor. As a result, the engine may not start. Hello, I have a sears leaf blower 358.794762 that will not

...leaf blower runs OK for 3-5 minutes then it slowly dies.... Any ides? Kind of hart to start. After 5 mins it slowly starts slowing down and eventually just stops/dies. Could be a blocked vent on your ...

...leaf blower just quit starting. Has always started perfectly, but now it just wont start. replace spark plug.if spark plug okay problem could be carburetor or air leak at fuel lines or check primer ...

...the fuel to run the precise specs but still not working i have aecho pb 260l backpack style leaf blower and it will not start. it turns over well and has spark and reasonably new fuel. any ...

...start. Maybe wrong gas/oil mix I think someone put the wrong mix in the leaf blower. I need quick tips on cleaning carbeurator. Hi If you remove the fuel you believe to be the mixture out of the fuel ...

leaf blower that will start but when you try to idle it up it dies any help appreciated Hi Check the fuel lines,fuel filter and clean the fuel tank.Disassembly the carb and clean it carefully.Diafragm

...leaf blower fuel pickup body and fuel line? Will not start after storage. Doesn't seem to be getting any fuel in the cylinder. Had this problem before, but had a service shop repair it. remove the ...

...leaf blower will not start. If you pour furl inti the carb it will start until fuel is gone. I have rebuilt the carb with new gaskets and seals. Does it have a clear primer bulb, and are you using it ...