Craftsman 118 pc Dual Marked Mechanics Tool Set "chain moves chainsaw idling" Questions

chainsaw blade turns constantly, even when idling. If the chain turns on the bar when the saw is at idle, then the idling speed is still too fast. If you turn the idle screw down until the chain stops

...the chainsaw chain from turning in the idle throttle position. Basically you want to set it so the chain has just stopped moving... but you need to set this after the chainsaw has warmed up a

Chain moves while idle We just bought a brand new 18" 42cc Poulan-Pro chainsaw. When we first started it, the chain moved while idle. We tried to adjust the idle speed with the idle screw just as the ...

chain moves at an idle then the saw is idling faster than the 2800 or the clutch springs are wearing out not allowing the clutch to release from the clutch drum. It has nothing to do with a carburetor

...chain from moving while in idle..but chainsaw has a hard time going into high idle..shuts down immediately??? Cuts out like it is out of fuel, I'm thinking I still need to fine tune the idle ...

chainsaw it will start up and run as long as i keep my finger on the gas trigger but when i take my finger of the trigger the engine die cut off what could be the cause how can i fix it. Try adjusting

...chain, moves even when the engine is at idle. the chain moves at quite a rate. what is the cause of this problem Three choices Your idle is set to high or your low speed jet is set to high Your chain ...

chainsaw is idling high and chain is moving when not in use !!!! saw is idling high how to set correct idle also chain is in continuous movement and will not stop even when saw is not in use but motor

chainsaw to cause this shutoff when the saw is moved around. Any solutions? The idle speed screw may be set too low--adjust so that the chain stops moving, but the engine keeps running. Drain the fuel

...chainsaw shuts off. Try turning the idle speed screw CW (not the jet screw marked L) one full turn to increase speed. Normally, this is set so that the chain stops moving, but the engine continues to ...