Question about Evolis Pebble Office Equipment & Supplies
Evolis Pebble 4 with a gold monochrome ribbon. Printing on pre printed blank cards. The print is not complete, almost as if there is not enough pressure on the card as it is printed. All the letters ...
Question about Evolis Pebble Office Equipment & Supplies
the card have a faint line across after printed. I have cleaned the printer but no luck. Usually a faint, light line running the full length of the card is indicative of either a need for cleaning, or
Patchy printing I have tried using the cleaning kit and have changed the ribbon but the printing is still very patchy......flashes of odd colour blemishes appear on the photo images and the print is ...
Question about Evolis Pebble Office Equipment & Supplies
on varnish the printing is break on 50% and stop? YMCK panels are printed but O pane break on 50% You must check for 1. Varnish Sensitivity in Properties\Graphics tab it must not be too high 2. Check ...
Question about Evolis Pebble Office Equipment & Supplies
have a Pebble 4 card printer and the ribbon breaks after each card is printed. I have a Pebble 4 card printer and the ribbon breaks after each card is printed. the card are not being fed when printing
Question about Evolis Pebble Office Equipment & Supplies
Evolis Pebble 3 printer: the varnish is being put on as black Help! I have three hours until a hugfe event that I need 25 more ID cards printed. The printing goes fine until the varnish phase: the ...
Question about Evolis Pebble Office Equipment & Supplies
Hi I got Evolis Pebble 4 and I have problem with printing the ribbon light is always ON and it does not print with YMCKO, but when I change to black ribbon K it prints. What is the problem. It sounds ...
Question about Evolis Pebble Office Equipment & Supplies
I have problem with my Evolis Dualys 3 printer printing a line on the card? Your print head needs to be replaced if it a horizontal line . Transport belt to be replaced if vertical line
Question about Evolis Pebble Office Equipment & Supplies
evolis pebble 3 is printing very dark and then has large yellow and magenta spots Check for luminosity and contrat settings in properties/graphic/more options If you have replaced print head enter its
...image... i had problem with dualys 3 that im servicing, the were using YMCKO ribbon for 2 sided prints with settings of YMCO/K, but the problem is, it diidnt print the Overlay at fron side, and
38 questions posted
Usually answered in minutes!
20 Questions
1 Questions