kit or cut an aluminium gasket for the 8x6 and then cut a 7x5 cutout in it. To not lose any sound qulaity you need to make sure that there is no airgap between the original 8x6 cutout surround and the
...or less. There's usually a short piece of wire with black insulation included in most amp wiring kits. If your Fusion sub did not come with such a wire, you can use any wire that is the same gauge
...chassis, therefore shorting out the circuit the same way a lightning rod conducts the lighting into the ground, instead of your home. A decent car stereo installer should be able to determine the ...
kit. Email me with questions on installs. [email protected] The easiest way to do ANY car stereo head install is to first: buy a volt meter tester. pull the old stereo out and look for the
chassis with a short ground wire. This article assumes the use of a single amplifier connected to a pair of subwoofers. If you do not have these components simply ignore the steps specific to the amp,
1 questions posted
Usually answered in minutes!
217 Questions
156 Questions
152 Questions
73 Questions
53 Questions