Zyxel NBG-417N Wireless Router "power plug doesn 39 work" Questions

doesn't work, you can also try rebooting the modem as well. You will then need to power all three down, then start with the modem and wait a minute as it boots up and runs its auto-tests, then the

...Sometimes, electronic equipments can operate much better if plugged in directly to power outlet than to a surge protector. If all of these doesn't work, then it must be a defective router

...power adapter maybe faulty. Test the voltage on the plug that connects to the router with a multimeter, the voltage should be slightly higher than the voltage that is printed on the label on the ...

...power cable on the router for 15 seconds, plug it back up. Also you have a reset switch on the back of the router that may help if the power cycling doesn't work. Hope this helps fix your ...

Power and Wifi are always on, no reactions after a restart or an attempt to reset. No other LEDs are on or flashing. Router's DHCP server doesn't work, so I tried with fixed IP via LAN

...power cable from the back of it, waiting 30 seconds and then plugging it back in. Give it atleast 2 minutes to get itself all setup again and then try the connection. This video may help too: If this ...

...plug in power to anything, connect all of your ethernet. So, first ethernet goes from modem to router.  Make sure they are in their proper places.  Next, take another ethernet cable and ...

...power outlet to see if the one you are using has not gone bad. If that still doesn't help then there is a chance that your router has failed. Being 3 years old it is possible. A failure can be ...

...plug in the extra cables on the back, to my other devices through RJ45 cables, it works without any problems... can anyone help me? NO WIFI SIGNAL AT ALL Try to power cycle the network. if still ...

...that, you could try unplugging your computer, and plugging the router into that outlet to see if it's not a bad power outlet. If it still doesn't work it might just be time for a new