Brother CS-8150 Computerized Sewing Machine "thread tension montgomery ward" Questions

...because of incorrect thread tension, dull needle, low-quality thread, lint or debris buildup or incorrect threading. It is best to check the threading, thread quality, needle and clean the

...the same threading sequence.

Just a hint: be sure to RAISE the presser foot BEFORE threading the upper thread so the tension disk will allow the thread to seat properly.

thread side just pulls out You have to tighten the tension piece that is on he front of the machine. It's the thing that you wrap the thread around and slightly pull back so the thread slips through a

...Thread Tension Threads Bobbin tension is usually the last thing to try to adjust...be sure to mark the screw setting BEFORE making any adjustment... Bobbin Tension How and Why Tension is Adjusted ...

...thread so the tension disks allow the thread to seat properly.

The ideal tension is when the upper thread and bobbin thread meet in the middle of the fabric being stitched. The tension will ...

...thread tension or loosen the tension on your bobbin. I don't know if you are using a newer model sewing machine or an older one; but if it is like mine, there is a little screw on the bobbin you turn ...

...tension discs. Now pull the thread upward bypassing the take up spring and pull until the thread gets trapped in the thread keeper slot just left of center near the top of the tensioner. Now pull the ...

...thread cannot feed through the tension track properly and breaks when I try to sew. How can I readjust the setting. The machine is clean and quiet and has a new belt. Also wonder which style metal ...

...thread tension, and it does not help. If I set the foot not to ruffle, it will sew fine. Take the foot off and check for a small burr in the area that pushes the material through. If there is a burr, ...