back of the sewing machine), you need to remove the diffuser. Then remove the bulb by pressing up and then turning it to the left. I believe that the tool is the "special screwdriver" listed among the
...remove the bobbin to get it out. Don't know if I damaged anything in so doing but then cleaned out lint and oiled and put case back in and the machine does not catch the bobbin thread. When I put the ...
remove the handwheel, handwheel side cover and back cover to see it. The screws you can see are self evident though there are screws etc. under the cover in the center of the handwheel and holding the
Question about Bernina Sewing Machines
...back out a quarter to half a turn. Attach the spring to the tensioner and relocate it on it's pin the same way as you took it off. Retension the drive belts: Make sure the tensioner fixing screws are ...
Question about Bernina Sewing Machines
...Remove needle & reinsert needle( flat side towards the back of machine) 2. The needle is damaged replace with new needle 3. The wrong size needle is being used Choose a needle to suit the thread ...
Question about Bernina Sewing Machines
...remove on/off knob and feed dog up/down knob on Bernina 1130 - do they just prise off and push back on? This question is in response to an answer to a previous question re: a high pitched squeaky ...
217 questions posted
Usually answered in minutes!
64 Questions
435 Questions
168 Questions
144 Questions