Question about Elna Sewing Machines
...turn the stitch length dial back to zero, then keep turning into "negative" area, it should look like this "-- --- ---- -----" on the dial. Turn it back about half way into the negative area and you ...
...turn the knob back to 0 zero and push in. This should return the machine to normal mode.Adjust your stitch length to 3 and try it. The reverse knob in the center should also stick out so that it ...
Zero turn Husqvarna Mower I changed the hydraculic filter and oil. Now the mower will not go forward or reverse. The pump pulleys are turning. Before doing this everything was working. Could I have ...
...turn it off my hitting it once again. If you just want to reverse for a little bit, you hold it down while you sew, then let go. Is the button lit all the time? Having said that, it sounds like ...
Question about Elna Sewing Machines
zero, then insert a cam into the Elnagraph on top of the machine. Then turn the selector to the disc icon, and the stitch length around to the "S" and stitch width to 4. Don't use reverse if using the
Question about Euro-Pro Sewing Machines
...zero. The machine will stitch in place and form a locked stitch 1) rotate the material and sew over the same stitching. Leave the needle down in the work and raise the presser foot, then turn the ...
...turn the flywheel to lower the needle down and up once to catch the bottom thread and bring it up to the needle plate. ALWAYS hold both the two threads at the back of the needle plate when you start ...
...turn the width to zero BEFORE you make changes to the stitch selector, most machines seem to like being treated this way, ie engaging cams inside the works. Also, it is always a good idea to check ...
...Turn it to zero and see if you can clean it by "flossing" with a piece of clean waste cotton, then turn back to 5, rethread and try again. Sometimes they get a bit of thread or dust in there. Hope ...
...zero knowledge when it comes to these older style machines. 'Note' Some of the gear mount nuts are on a "Reverse" thread meaning you turn them the 'wrong' way to get them off. My limited knowledge is ...
1,346 questions posted
Usually answered in minutes!
49 Questions
48 Questions
25 Questions
19 Questions
8 Questions