Husqvarna Viking 1 "tension plate" Questions

...birdnesting? i am getting some thread that bunches up under my fabric. I have played with the tension changed needles, and rethreaded both top and bottom bunching up under the material is loose ...

...to face each other, back of the plate to back of the plate, like )( and not like (). Typical tension diagram: ...

...plate or bobbin case, replace them with exact replacement parts, if they remain on the thread guides, take-up lever, bobbin hook or tension regulator, take the machine for professional service. 3. ...

plate. The upper tension unit, look straight down from the tension unit and you should see some metal disks which the upper thread rides through when threaded. Take your small cleaning brush and brush

...plate and usually rethread the needles, etc. It is almost for sure tension adjustment. 1. Because there is higher tension on the bobbin you need to check it so it is allowing the thread to move with ...

...plate that houses the tension plates and dial. Can't get it back on. No one has documented stripping and replacing the top tension discs and spring. In normal circumstances, no one ever takes them ...

How do I adjust the thread tension and bobbin tension on a Huskystar 207? thread tension is by a knob on the face of the machine if you find by adjusting that , nothing is happening , check the way ...

My tension is off. My stitches are even and perfect on the top side of the fabric, but the top thread is looped, with the bottom thread uneven and slack. I've changed needles, cleaned the feed dogs, ...

...you use same thread on bobbin as on the machine. Check needle for nicks or bent. Make thread is threaded correctly, passing through upper tension plate. check tension plate(upper) for rust or