Husqvarna Viking 1 "sewing machines low bobbin indicator" Questions

...low bobbin indicator, if so, where is it? Thank you If it does, it would be in the owner's manual. (I'm unable to locate information on "Janome 5," so there must be more information to the model.) ...

Low bobbin thread indicator not working on Pfaff 2044. Using clear bobbins. Is there a lamp or sensor that can be replaced? Have you tried to take out the bobbin case, close the door, and see if the ...

Bobbin thread low, have lost the message which indicates the bobbin needs to be changed? Make sure there is no dust or lint in the way of the sensor. Any lint there will stop the sensor from advising ...

...sewing and then recommence that indicates a low tension of the needle thread increase it up until the situation improves Before you begin sewing, it is always helpful to pull up the bobbin thread up ...

...Low bobbin indicator - you need to change to a fuller bobbin. I have the same problem with my Bernina Artista 640. It sews 15 stitches and stops. It's not because of not enough thread in the bobbin. ...

...sewing machine, applying 1-2 drops each spot indicated. Install a brand new needle. Avoid old, fuzzy, or bargain bin thread. With the presser foot in the RAISED position, rethread the top ...

...bobbin case may settle a bit in its seat and that makes the hook too low for the thread to catch on it and I honestly don't know if there is a fix for that. You'd need a good repair guy, ideally one ...

...sewing thin fabric and the fabric is floating, stiches under are loose. I see no place to adjust the pressure foot. You can't adjust the presser foot force on the 7033. The loose loops indicate the ...

...low number and re-test the stitching. Re-adjust as needed. The tension is correct when both upper and bobbin threads meet in the middle of the fabric. Understanding Thread Tension Threads If it is in ...