GE WWSE5240D Top Load Washer "reset lid switch" Questions

...reset the off balance switch? Check the lid switch for continuity. Bad lid switch= no spin. You could also have a reset in one of the knobs. It could be the push in pull out control knob OR the water ...

...lid and look then reset Tbone, make sure the lid switch is not broke or loose and the actuator is making the lid switch. Usually when you have a no spin, no drain on these direct drive models it ...

...reset my washing and it doenst fix anything? it appears when its going to spin the dryer :) THANKS NEED RESPONSE ASAP It's the matter of door lid switch. door lid switch or safety switch is faulty. ...

...RESET, DID NOT WORK. If your washer doesn't seem to work at all, check these: No power Lid switch No power Check to see whether power is getting to the washing machine. Is it plugged in? Has a fuse ...

...lid and hit reset. Been doing this consistatnly for week or so now. Only solution is to raise and lower lid and hit reset...hope for best and repeat 6 or 7 times until it finally decides to complete ...

...reset" switch on these. The lid switch is bad. You know how, when it is washing clothes, you can lift the lid and the machine shuts down? That's the lid switch doing that. Now, you lid switch is ...

...lid switch needs to be reset or replaced. Open the control console to access the lid switch. Check the fuse for continuity. Check the alignment of the lid switch for contact with the micro switch. If ...

...lid switch. On that model the lid switch is the flat plastic square on the right front recess area that the lid closes into. The switch is activated by a magnet mounted on the washer lid on the front ...

... Possible that the lid switch alignment is not proper and so does not activate when the lid is closed. Please reset this lid once again and check the switch continuity with a meter when the lid is ...