Question about Whirlpool Washing Machines
...inner tub and get caught there. When the unit goes into spin, the object will spin along with the inner tub and rub the outer tub making a scraping/grinding noise. To find out if this is the problem, ...
...no clips or screws. If you dont find the nail there under the agiator the inner tub would need to to removed to see if it's in the outer tub. To remove the inner tub a special tool is needed. ...
paddles are normally fitted from inside out of the inner tub. You will have to strip the whole machine down to remove the inner bowl and then you can get to the fitting which holds the paddle in place
carefully remove the facia. Take the screw out, take the panel off. Fit the inner part of the seal to the tub. Reassemble the front of the appliance. Fit the seal to the front. Leak test the appliance
...back .Need more info to tell you how that part would be sold///sometimes outter tub comes as complete unit with inner basket ..........If I helped you please vote need more help please ask....good ...
...inner tub attached to trunion and rotate and lift the tub most of the way with tub attached it adds extra leverage to remove the trunion once most of the way up remove inner tub from trunion and it ...
...tub rim - requires patience and you amy not suceed first time round. refit inner clamp fit seal rond cabinet -0 this part is easy refit outer clamp. test for leaks on rinse as the water level is ...
...inner tub. A spanner wrench is the best way, but you can use a large screwdriver to lossen the nut. Pull the inner tub. If it doesn't release take a hammer and a driving tool aka anything that will ...
...inner tub and the outer tub. I can't figure out how to access that area to remove the clothing. its fitted by a screw, pull the cap in the center and you will find the screw there. unscrew it to ...
1,338 questions posted
Usually answered in minutes!
874 Questions
371 Questions
398 Questions
323 Questions
255 Questions