...bottom part of machine are in side wall dirty with grease if so leaky centre pole if so not good news replace machine to costly to repair if inner walls clear of grease check for loose hose and ...
Question about Daewoo Washing Machines
...bottom base rotor and clean it. Cannot totally get rid of the black film. Frequently, if you use low temperature washes most of the time, a layer of grease (sounds yukky) builds up in all washing ...
...grease on the inside of my washing machine. What could that mean.? I did a load of wash and noticed a little bit of black in the bottom, I put old towels in did another load and the black stuff was ...
Question about Washing Machines
Hi, We are getting grease in the washing water.....any idea what's up bad bottom seal Sounds like your bearings are going Only place grease could come from is the transmission
Question about Whirlpool Washing Machines
...bottom and it appears grease has been thrown from the bottom of the machine. Could this be a bearing problem and if so can I get a bearing or is this an all in one unit with the tub? is it loud in ...
...grease look under the bottom of the machine and look on the side walls of the machine if u have a line of grease around both sides then you would need to change the transimission on the machine if it ...
...spots on my clothes. I found a grease spot on the bottom of tub. What could this be? its the topseal on the transmission thats leaking,the term for this is called "back-wash" you need a new ...
...grease / oil on the bottom of it. You may have to use a belt or similar item to slip under the agitator and attach the other end to a broom handle to pull up if it is difficult to remove. If there is ...
...Washing machine turning one way, not turning back resulting in clothes tangling up the machine has a broken wire to motor possibly check that first if not does machine spin otherwise at the bottom of ...
Question about Washing Machines
...night when the load finished, there were several oil/grease stains on the clothes. And there are still stains on the bottom of the drum. Main seal and bearing have gone bad and needs to be ...
1,338 questions posted
Usually answered in minutes!
874 Questions
371 Questions
398 Questions
323 Questions
255 Questions
