...side of the back. Torx heads) and look down inside while you start the cycle. Look for leaks. Good Luck, Dan With my W113 washer, if the "Intake" and "Drain" Fault lights (& buzzer) come on the ...
a blocked/jammed pump impellor. Manually drain it from the lower drain pump (by side tube if that model has one, or slowly into a shallow pan. Remove cap completely & check for things jamming pump
...side This is usually a plugged drain trough. Every time your refer defrosts itself, the melted frost drips off the evaporator behind the wall of your freezer and drains into a drain trough, through a ...
Question about Washing Machines
...drain pump? If top load, look in the back by the water lines. The pump would be in the frame behind there just follow the only tube besides the water lines. If a front loader look directly below door ...
Question about Samsung Washing Machines
...drain hose is in the back on the right hand side. This is a rubber hose. After a time the rubber may be dry rotted and leak or become partly clogged with soap residue. Once completing the wash cycle ...
Question about Tricity Bendix Washing Machines
...side , in front of the appliance. Be prepared to collect a lot of water with a pan when you undo the pump. A blockage in pump is the most common cause for drain problem, however, if there is no ...
Question about LG Washing Machines
...drain pump. It is on the front lower side of the machine. There is a small door which opens to it. Unscrew the filter and the pump cover. Be careful when you do this. There is a small drain hose next ...
...drain hose behind the small door on the lower left side of the machine. If not, you can try using a large pan to catch the water, but to be honest, it will take forever and won't really get all the ...
...left side there is a cover cap open it up an there is a drain pump filter and a drain plug. plug may be lose. But clean the drain pump filter.an tighen the plug. if that dont work call ...
...drain hose is kinked or clogged. Under the front door there is a panel that is the width of the machine and is held in place by two screws, one on either side. When you remove that you will see the ...
1,215 questions posted
Usually answered in minutes!
992 Questions
371 Questions
398 Questions
323 Questions
255 Questions