spark can be seen but the burner still fails to ignite, it may be an issue with the igniter. You may need to replace the igniter or contact a professional to inspect and repair the issue. 1. Check the
...Spark Igniter. Click on the pictures below for a larger image. The Spark Module is number 318 in the following diagram (underneath the burners): The Spark Igniter is number 154 in the following ...
Question about Maytag Cooktops
...burner with a matchj Turn off gas. Remove the cartridge and remove back cover. Clean the ignition spark area. Re-install the cartridge without the back cover. Try to ignite the spark. If the spark ...
Igniter doesn't spark on only one burner Igniter sparks once the burner is lit by hand, and if you press down on a control knob to ignite another burner. The other three burners ignite OK. The model ...
...spark from the igniter and gas flowing. I have to resort to using matches for these two. any suggestions? The spark gap needs to have flow of gas across it for ignition to occur. The gas outlet holes ...
igniter spark for all gas rings remains on permanently without pressing down the gas flow knobs. I can see nothing prompted this - I just came into the kitchen one morning to hear the igniter clicking
Smeg gas hob ignition Hi,I have a problem with my smeg gas hob. When I turn off the gas after cooking the ignition won't stop sparking on all 4 rings even though I am not pressing the ignition down. ...
...igniter started sparking and flames came up the burner hole. Now two burners won't ignite and the other two spark at the same time when turning one knob. What should I do? Here is a tip that I wrote ...
rear burner does not ignite the igniter (spark unit) gets power but boes not spark. I have switched the leads and get the same result. Are the spark units replaceable?? Spark units are replaceable
70 questions posted
Usually answered in minutes!
136 Questions
43 Questions
50 Questions
27 Questions
34 Questions