...schematic to locate the HV diode and check it before I locate a new magnetron? Or, is it even worth getting a new Magnetron? I mean, these are running for about $200-$300 retail. Thanks! Sorry to ...
...switch on the door actually was the problem. It was sticking in the closed position. I exercised the actuator and sprayed some WD40 on it and it's working fine now. As a side note, after looking at ...
light for time ect just went dead while rewarming up a bag of steam green beans. Theres wasnt a thump or anything like a power surg, went and checked breaker,and breaker was ok, just quit...... so any
...light when you open the door and no beeps when you press a pad on the keypad? Is the outlet working? A microwave can be dead for many reasons. Itmay be the fuse, which is usually located behind the ...
switch mount. If it's intermittent or random, it may be a bad connection, usually on the control board or a loose fuse holder, or even an intermittent fuse. You should do a continuity test on the fuse
111 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
257 Questions
