Maxent MX-42HPT51 42 in. Plasma TV "input mode hdtv hooked antenna" Questions

...mode not getting any channels. Hooked up a Vizio tv to same antenna line and got all the locals. Maybe something wrong with the Sharp? Make sure that Sharpe is set to over the air/antenna and not ...

...input which should be the ASTC tuner. The proper menu comes up but when you try to go into the HDTV tab to get to the channel scan mode the screen just goes to all blue and it says "no signal". We ...

input maxes out at 1,360x768 resolution (which did look pretty good) instead of the full 1,920x1,080. We did connect a PC via HDMI and got 1,920x1,080 resolution, but the image didn't look as sharp as

...mode. If not, just press the "EXIT" or "MENU" button on the remote to close the menu. You also need to make sure the correct INPUT/SOURCE is selected on the TV: 1. Press the "SOURCE" button on the ...

...HDTV. Ideas?? . I changed from my component video inputs to the ones on the side of the TV and that works. Seems like the high quality video receiver, i.e. the control box, is the problem, per other ...

...of A/V (yellow,red & white) cables from the output of the satellite receiver to the video 1 input on the tv. You'll then have to switch the tv source mode to video 1. Hope this of some help, ...

...Input TV/DTV, and the Signal Source set to Antenna. Turn the antenna and then set the Additional Scan to On. (Menu > TV > Channels > Additional Scan.) Then do another channel scan. If you ...

...input mode using the INPUT button on your TV remote.See page 11 of the TV manual, button number 7 on the remote control button layout diagram.Keep pressing the INPUT button repeatedly until you see ...

...input/output pcb.(not necessary to replace the pcb unless you need that particular I/O port) could also be your wiring between the source & your TV. Sometimes if it is the source you might just ...