Perrin and Rowe Rohl Bath U-5388 ; U 5388 Ceiling Shower Arm 4 inch "handle spins hot water" Questions

...hot water is fine in the sink, but when you spin the single handle it goes great power through the cold water range, but as it moves into the hot water side it is as if you are turning it off, until ...

...for hot cold mix I removed face and unscrewed one screw to remove Hot/cold mix from handle.. Now what? There are answers to this question already posted here. work on your search words on ...

handle spins endlessly. It sounds like you didn't get the valve in properly. Is the newer required type? (Single stem) ,or is the older brass type? When you install the single type, they have a tab to

...the moen cartridge on the cold side, The water comes out only when the handle is turned about 90 degrees. The new hot water cartridge is OK. Pull the cartridge back out and spin it 180* and

...hot temperature Remove the handle and adjust the temperature limit stop. This is a plastic geared piece which you can pull out and spin clockwise to they 1 o'clock position and then put back in. This ...

...handle spins off, but most likely not by hand (hot did, not cold). I used channel lock pliers and some wood strips that I fabricated to prevent damage to the finish. You then need a thin 17mm wrench ...

...hot and cold will be reversed. Simply remove the handle and spin the spindle 180°. Pull off the chrome stop tube that encloses the cartridge. There is a horseshoe-shaped retainer clip that must be ...

...handle back off, and turning the water back on. Spin the valve stem and see if you can find the off position that way. Hope this helps Had the same problem and it drove me nuts. I think I've just ...

...handle shower knob turns in a complete circle. From left clockwise, it goes from hot, tepid, cold, tepid, then back to left-hot. What causes this and how can it be repaired? It sound like you have a ...

...handle off. The screw keeps spinning and the only way I can turn the water from hot to cold is with a phillips screwdriver. I bought a 3231 kit but how do I get the old off if it is stripped? Once I ...