...fan, the motor goes but the blades dont turn. it was working fine and all of a sudden it stopped. well the blades stopped the motor kept going! There is usually a pin in the shaft of the motor, that ...
...fan, and hold any applicable glass onto the light kit. * Even if you don't have a speed control, the motor will still produce an electrical hum -- and the blades, which are physically attached to the ...
...fan is to isolate the motor vibration from all other parts. This occurs, in the majority of fans, in three places: between the motor and the blade brackets, between the blade brackets and the blades, ...
...fan, and hold any applicable glass onto the light kit. * Even if you don't have a speed control, the motor will still produce an electrical hum -- and the blades, which are physically attached to the ...
...fan motor is humming. how do we eliminate the the fan motor is humming. how do we eliminate the noise? If it's turning then switchit off. Clean the fan blades and dry them lubricate the fan motor ...
fan motor only hums but does not turn blades. Blades will turn manually so they are not stuck. No dimmer is attached. Manual says unit is self-oiling. Is there anything I can do other than buy new fan
...motor and clean it. Clean the fan thoroughly then turn it on its back and spray some WD40 down the metal fan shaft several times without changing the position. Manually spin the fan blade several ...
...Fan. It works fine, except there is a very loud 60 cycle hum when the motor is operating. I used a 20 foot 18 gage extension wire to hook up to the 110 VAC source. What do I need to do to eliminate ...
...fan is on 24/7. What can I do? The motor has gotten tired now after being on 24/7. With the blades off, it would turn easily but the weight of the blades strain the motor. You could check that there ...
16 questions posted
Usually answered in minutes!
251 Questions
153 Questions
60 Questions
24 Questions