Polaris ATV "stroke timing" Questions

...timing the valves on the exhaust stoke tdc and not the compression stroke tdc turn the crank over till you get tdc again and see if the inlet and exhaust valves have clearance and the timing marks ...

...make of atv sounds like you might have a timing problem were you do have spark but at the wrong time need more information to know for sure and also is it 2 stroke or 4 stroke 2008 hi bird qh 250 ...

...check jets for plugage clean jets write down numbers check dealer for correct jet size for your elevation if 4 stroke back fire thru carb indicates timing is off or bad intake valves or cam lobe ...

...stroke, the timing is off, the lobe could be worn on the cam or burnt valves. Either way pull off the head and look. If it has a lot of build up, soak in parts cleaner, if you have a ultrasonic tank ...

...timing and got no compression can you tell me why? If its a 2 stoke,"takes gas oil mix", piston in backwards,, ,,,,if its a 4 stroke "takes gas only"...rocker arms need adjusted, or cam not set in ...

...timing will jump if u dont stop it from turning remove spark plug and put something inside cylinder like a piece of rope to keep piston from moving must be on up stroke when doing this must not move ...

...timing for Polaris Sportsman 300 - year 2009 the cam must be timed in with the piston at TDC on the compression stroke..the cam lobes must be where they have the most clearance..they are marks that ...

How do you line timing marks up its out of time flywheel on T in the compression stroked and cam marks lined up.

...stroke will run backwards!!.. (But, I have actually seen a two-cycle engine run backwards.... just retard the timing to zero). 1. Have you changed the spark plug? 2. Have you had the carb cleaned and ...

2004 Blaster 2 stroke 200cc fires but well not kick start it seams like no gas is geting to the spark plug. some times it back fire when you try to kick start it. also the kick starter seams to get ...