Polaris ATV "starter engaging flywheel" Questions

starter is hooting out and engaging the flywheel. And if it is working it is possible that you have missing tooth/teeth on your flywheel and the starter cannot turn over the engine because of that. It

...not engage so poled it and found oil in it and the flywheel compartment how to fix? not sure what four wheeler you have but oil in there is normal. sounds like your starter isnt engaging the

...starter and flywheel while attempting to start the engine. Does the small gear at the end of the starter move forward and engage the flywheel when you try to start the engine? Could it be stuck? The ...

...check that the pinion of the starter is engaging the flywheel teeth check that the over run clutch of the pinion is engaging and not over running when it is supposed to lock up to turn the ...

...it's rotating but engine isn't turning over Check the starter to see if it is engaging the flywheel. There may be a flat spot on the flywheel so the starter cannot mesh with the teeth on the

...on the flywheel could be chewed up too. If you just installed a new starter, you may have to add or subtract clearance spacer metal tabs so that the starter drive engages properly with the

...starter and replace it engaging the teeth sequence so they are locked together, you cant just put on on it without interlocking the teeth, take it loose then reposition it with teeth engaged then ...

starter drive assy. 1999 Polaris Ranger 6x6 starter drive assembly does not engage flywheel is battery charged enough to make starter spin strongly.

first. Pull the starter and see if you can turn the flywheel, if not the engine is locked, pull the plugs and check for liquid lock, if the engine does turn the starter may be defective have it tested

...or the teeth ground down on 3 spots on the flywheel. Hey Girlfriend, Remove the starter, have it tested..(professionally)... or you may see the problem when you remove it. Do this and ...