...spa. If the indicator goes away the filters are clogged, bad. Locate the pressure switch normally threaded into the heater tube. There should be two wires attached. Remove the wires and connect them ...
...pressure switch on an arctic spa My flo light is on for pump 1. Tried all trouble shooting tips. How do I replace the pressure switch which is listed as a possible solution First, locate the pressure ...
Question about Hayward Pool & Spa
...spa or pool, the pressure switch may require an adjustment to compensate for the no-flow static head. CAUTION: The Hayward Pool Heater is essentially a furnace. A trained technician should be ...
pressure switch I replaced my pressure switch. At the connection it leaks. When we tried to attach the old pressure swith no leak. Weird? what to do? replace the syphon loop ( copper waterline) with ...
Question about Solar Pool & Spa
...filter out as well. disconnect both connections from pressure switch in raypack heater. check continuity. if switch opens at any point and you have no flow restrictions then replace the pressure ...
Question about Raypak Pool & Spa
...pressure switch, no change water is flowing through the heater clean out pump basket, backwash filter for starters. jump the pressure switch if nothing changes. if burners fire then replace the ...
...that either there is no water flowing through the pool heater (possibly due to a dirty filter) If you know you have good water flow, then your pressure switch has failed. Replace the pressure
...screen. What does this mean? Either the pump is not pumping enough water through the heater to activate the pressure switch, or the pressure switch or its wiring has failed. Replace pressure switch
spa pressure switch pressure switch Jump it, (bypass it with other wire.) If the heat kicks on, the psi switch was bad. In the event that works, replace the switch, do not leave it "jumped" or further
199 questions posted
Usually answered in minutes!
170 Questions
177 Questions
72 Questions