Polaris Pb4 - 60 Booster Pump "wont start new" Questions

...wont pump keep running after running dry pump feed line broke do not know how long pump ran pump will start but not stay running long enough to pressurize line you overheated the seals in the pump ...

...wont work. If that is not the case, be sure you have a resistance reading somewhere close to 1 ohm across the L1 & L2 terminals. If you get infinite, there is a problem with the motor. I assume ...

...wont start Most likely it is the start capacitor or possibly a stuck motor switch. You can remove the power to the pump, then remove the back cover and you should see a black capacitor there. Remove ...

...wont turn on Check your connections to make sure that a lack of pressure is not causing your problem. Also, make sure that your impeller is not jammed, which will cause the filter to not work. These ...

...start, and hum for a few seconds but then it just shuts off. The motor will try again after a minute or two only to shut off again. The cycle continues. I've filled the filter basket with water, the ...

...start-up steps from beginning and it still leaks. the filter/waste outlet continously runs while the pump is on. Mine does the same thing, it wont filter it just keeps sending waste out, I replaced ...

...wont to start.Do i need to buy new panel to be able to work? I think I just answered you question before, I provided service manuals and a few other pints. ...

...wont spin. I took it out and the impeller and shaft spin fine. Any way to diagnose the pump? I can't afford a new one. Thanks If I understand your question, your spa pump will not spin up. I believe ...

pool pump has power but wont turn on with pump off try turning the motor shaft a few times then try if doesnt start need a new motor

...wont start when cold If this only happens when it is cold it is probally just a start capacitor. If you open the back of the motor it will be a black cilinder abount two inches by an inch around with ...