RTO Letro Jet Vac Automatic Pool Cleaner without Booster Pump "bottom cleaner" Questions

...bottom of pool... Cleaner will not go to bottom of pool Have you adjusted the setting? If you have it set on "top" or "automatic", try moving your setting to strictly clean the bottom. If you have ...

cleaner not staying on bottom, its goes in circles but never reaches bottom Check your wheel RPM and make sure that it is not more than 32. If the pool cleaners RPM are too high, it can cause the ...

...bottom, and automatic". If you have the cleaner set to automatic and it is staying on the surface, try changing the switch from the automatic setting and put it on "bottom" until you get the bottom ...

cleaner will be forced from the bottom of the pool. Make sure that your back up valve is cycling properly because it, too, can cause the cleaner to lose contact with the floor. You might need to use a

...that it will dive to the bottom of the cleaner. In addition, check the pool cleaners hose weights to make sure that they are spaced correctly and that you don't have too many hose floats

...or has debris lodged in the flaps, the pool cleaner will not be able to create suction on the bottom of the pool. Also, check and make sure that you have enough water pressure to power your

...bottom of pool If your cleaner is running in top or automatic mode, try moving it to bottom. This is a common problem with these pool cleaners and owners often forget to adjust the dive setting. If ...

...just floats around about one foot off the bottom Either you have an air pocket in the cleaner,or your backup valve is bad.The backup valve is the baseball sized unit on the hose going to the

...cleaner is not making a connection with the bottom of the pool, it is probably debris caught in your flaps. This is a fairly common issue with these pool cleaners. Throughly check the flaps for any ...

...bottom flaps come off in the pool. Can you buy the diaphram separate??????? You can buy any part that is removable on that cleaner. i renewed the bearings in the pump. The pump is running fine. Every ...