Question about RTO Water Heaters
...go?s off the pilot light goes out also. What could be causing this? I have replaced the thermal coupling. MAKE SURE THE BURNER TUBE AND ORIFICES ARE CLEAN. MAKE SURE YOU HAVE THE PROPER LP
...Lp won't turn on I have replace the water hearter control valve, a new one under warranty. I initially get a pilot light to burn, no leaks that i can see. Leak check everything, no leak on the pilot ...
...pilot light won't stay lit. The small round outlet on the right of igniting area allows the pilot light to stay burning. immediately upon removal it goes out. is there a screen or something that ...
Question about RTO Water Heaters
...light the pilot, it remains on, so I turn to "On" position and the burner kicks on for several minutes, then pops and shuts off all gas and pilot. I can re-start it as soon as I re-light pilot and ...
lp waterheater won't stay burning as soon as mainburner lights both mainburner and pilot go out and will not re-light right away check the pressure comming into the burner thru the gas valve, it has ...
Question about RTO Water Heaters
...light the pilot, the flame light at the small hole on the outside on the pilot burner You have a plugged pilot orifice. That small hole is basically an air intake for pilot when working properly, and ...
pilot light keeps going out pilot light keeps going out Either the pilot light orfice is dirty, and you will need to pull it out and clean it, or the thermocouple is bad. If the pilot goes out as soon
...pilot light is lit the flame shoots back out of the tube. All tubes have been checked for blockage. Try pulling burner tube back (out from chamber) slightly when this happens and see if it makes any ...
light. What I have noticed is that after all of the hot water is gone out of the lines and after turning the hot water on and off a few times ,it sparks and ignites the pilot and burners. When a major
Question about Bosch Water Heaters
pilot light went out and would not stay lit. I changed to my 5# back up tank and hours later its working fine. Please show me a digram of the tank with pressure relief valve and how open it should be.
297 questions posted
Usually answered in minutes!
212 Questions
27 Questions
22 Questions