Kirby Ultimate G Bagged Upright Vacuum "replace sweeper belt" Questions

...belt and turned on the sweeper and the roller brush would not turn and the belt broke. It is my daughter's sweeper and I was using it and feel responsible for the problem. It is a Bissell Bagless ...

...belt is intact and everthing else works. I brought the sweeper at a yard sale. athe sweeper is just like new. I called Dyson and the support department had me to take the cover off of the brush and ...

belt on a hoover sweeper model U4263-930? undo screws on bottom of vac take out brush and belt put belt in then manewver brush in thank you for useing fixya please rate me Remove the bottom plate with

replace the belt I bought a new belt and I can't get the belt back on On this page http://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm there is a video at the bottom on changing belts on a

...sweeper brush roller and clean the end bearings of debris. Oil the bearings lightly with 3-1 oil or similar machine oil. Clean the motor shaft with alcohol as well as the brush drive area, and the ...

...sweeper since Nov 2004 and it now makes a lot of grinding noise. How do I get rid of the noise, it works well but noisy.... if its that old the plastic gears and parts are probably wore out. Euro pro ...

a belt for a eureka boss bagless sweeper Here is a link to the belt you need and a link to the manual which has instructions: Eureka 5849A Replacement Belts Eureka 5849A Owner's Guide (2.67MB download

How do you replace the belt on Royal Canister carpet sweeper #4750 Follow the link to YouTube How to Replace Vacuum Belt

...replace the belt on a Orick Commerical XLPRO14T Vaccum. you can tip the vacume on it's side and turn it on and if the roller/sweeper is turning then the belt is good -- but if it is not turning then ...

3760-4 Eureka Sweeper where brush does not turn I have an Eureka 3760-4 sweeper when the brush does not turn. I have already replaced the belt with no change. Any ideas? the belt broke or came off