Velodyne CHT-10 Subwoofer "speaker wiring wire goes voice" Questions

...speaker wiring I have acquired 2-8" passive radiator Polk speakers from Monitor 5's. I can't tell where any posts may be to hook speaker wire to. Help. Passive Radiators are not driven by the amp. ...

wire to the black terminal). Now play a simple selection, like a jazz instrumental with a good walking bass line, on your system while you're sitting in your listening position. Have a friend dial the

...speaker internal wiring schematic? More specifically, the internal wire color codes that go to each original driver's positive and negative terminals. The factory wire color code inside enclosure is ...

disconect the speaker (keep the two wires from touching) and see if the amp then turns on and stays on. If it does then the speaker is faulty, if it still goes off then there is a more serious problem

...voice coil right at the horn`s terminals then with the crossover network connected you would go down the line all to the speaker box terminals to check for an open line. But if you don`t have a ...

...speaker type, tweeter, woofer, midrange, wire size, magnet, etc. In short, measuring with ohm meter is not reliable and it's best to listen to with high freq and low bass freq, then inspect cones and ...