...Freehub body is made by DT and you do not need any tools to remove it from the hub. If it is really sticky you may need a screwdriver to pry it loose, then pull. If it is an older wheel, some of them ...
...freehub body has gone bad. This happens on very basic bikes and when your have very high miles. The freewheel is an inexpensive fix however, the freehub body requires overhualing the rear hub and can ...
the rear freehub body on my specialised mountain bike is sticking,can it be removed Take it to a shop and have them show you how to deal with this. Special tools and knowledge required the first time.
...and having them assess it and install it unless you have the skill and all the special tools to remove the cassette, cassette body and hub ...
...Freehub off of the hub body is fairly simple on Mavic. You will need either Mavic Mineral oil, a lightweight mineral oil or other very light lubricant when you are done with cleaning. This can be ...
Question about Trek Cycling
...freehub (or freewheel) body, into the place where the ball bearings and springs and pawls are. Shoot it with lube and tap it with a hammer or wrench to set up some vibration. Spin the body backward. ...
How much torque to you apply to a Campy 10-speed freehub body lock nut? Apply pressure until it makes a clicking noise. Once it makes the noise it isn't tightening any more.
4 questions posted
Usually answered in minutes!
23 Questions
4 Questions
1 Questions
