Electrolux UltraLux 2000 Bagged Canister Vacuum "slide switch" Questions

Ad

Question about Electrolux Vacuums

1 Answer

...switch which is not working. There are strips/bumpers along both sides that I have tried sliding off but they wont slide off and there dont seem to be any screws under these strips/bumpers. Can you ...

Ad

...slide track. Make sure the red on/off switch on the sweeper is set to off. Put the handle back with the switch in the off position. Test the sweeper using the handle a few times before reassembling ...

Ad

Question about Vacuums

1 Answer

...slide does not operate the switch but slides over it.The switch seems to work easy enough by hand.Cleaner was purchased 2-23-07 Any iseas? If the rod isn't pushing the switch, then something inside ...

...Slide it between the bottom of the switch and the molded plastic on the vacuum. Make sure it is snug. Try the switch. It should be working now. Now carefully slide the housing back on. I like to ...

...the vacuum cleaner you have. They have a sliding "handle switch" for $7.00 Parts company it's not that easy to do but you could fit a small slide switch like from Jaycar electronics part number ...

Question about Hoover Vacuums

2 Answers

...Off-0n Switch Can't get the handle off, but my vaccum doesn't have a rocker switch anyway, it slides up and down. Anyone know how to release the handle from the self-propell cable and what the ...

...slide switch is in carpet position-- The idler arn which tensions the brush belt may be broken-- The idler arm override which is attached to the carpet slide switch may be brokenThe second one is ...

switch when slide the plastic switch on the handle. What happens is the plastic wears out and does not make good contact with the real switch. A simple solution is to wrap duct tape around the plastic

...switch. Remove the bad door and set a slide. There should be a tool caddy at the top front of the unit now, may or may not have a clear door. Remove the tools and locate 3 screws if there was a turbo ...

...slide. It will be necessary to remove the handle, switch plate, and upper motor shell to access the slide. Two large phillips screws hold the pivot assembly to the slide. The pivot must be loosened ...

Not finding what you are looking for?
Electrolux UltraLux 2000 Bagged Canister Vacuum Logo

222 questions posted

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

eVacuumStore.com

Level 2 Expert

47 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...