Kenmore Elite Oasis 27052 Top Load Washer "washer lid unlock" Questions

...Washer #27087. Doing a load of wash & wash & lock lid were flashing. Could not unlock lid & panel kept flashing. Unplugged cord for 30 minutes. When I plugged back in & hit start ...

lid when there is not power to it? Washer stopped mid-cycle, it is full of water, and the panel is completely dead. I need to manually unlock the lid to empty the water since the repairman cannot come

...washer (did not help) I have tried another setting (Nothing) what could the code possibly mean? The DU in the display is an error code for the door lid not unlocking. This is an indication that the ...

...water is gone it should unlock the lid.then check for blockage. turn the timer or cancel any kind of wash cycle then unplug the unit for a few minutes this should reset the control to unlock the ...

unlock failure Excessive force on door lid is preventing lock bolt from retracting. Wash media buildup is preventing lock bolt from retracting. Machine/motor control cannot determine if door lid is in

washer, just over a year old. It has two problems. The cycle indicator button is beeping constantly, second it will get to the spin cycle and then just stop. I have to unplug it wait a few seconds and

...lid and rearrange the clothes but can't get it to resume to the rinse cycle. so I hit power off and this starts the wash over Hello, the link below explains how to repair and replace the washers ...

...lid of the washer for this). To get at the switch, you have to remove the lower front panel. These are torx, I believe 3 screws. By turning yourself on your head, you can visually inspect the lock, ...

...washer. Every 40 to 80 loads I get a DLF or door lock failure code. I have to unplug power, remove lid and and press in pink wires that go into a green plug connected to the controller board. I read ...

lid lock does not work This advice is for Kenmore Elite and Whirlpool Duet model front loading washers. If you experience a problem where the door becomes jammed and will not unlock or open, here's an