Question about Kenmore Elite Washing Machines
...broken off. What that button does is tells the washer the door is closed so it can go ahead and lock it to start the cycle,its perhaps broken off sothe machine doesnt think the door is closed and ...
...washer kenmore elit The belt keeps sliping off and not turning the tub. We replaced the belt and it has only been 3 weeks and it is off again not broken. how do the pullies look ar ethey worn or miht ...
...wire or a broken switch. In case there is no loose wire or broken switch, you should replace the switch. Good luck! fdl error code on kenmore elite he4 washer. wont start after selecting wash ...
Question about Kenmore Elite Washing Machines
washer stops and flashes f35 F35 This typically indicates slow drain condition. Check for any clogs or kinks in the drain line. Also check that the pump is not clogged and that no pump impeller blades
Question about Kenmore Elite Washing Machines
broken belt? Hi, When my washer did that, I found that the shocks that hold the tub were bad... Check out this tip I wrote about that... Washer Problems Washer noise when spinning http://www.fixya.com
washer ofbalance Check the Vibration damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3. The plastic knuckle mounts are not missing/broken. 4. There ...
Question about Kenmore Elite Washing Machines
...washer to ensure the latch pin is intact and not broken. Then, inspect the latch mechanism on the front of the washer to ensure nothing is lodged inside. Last of all, remove the top and panel of the ...
door spring broken The door spring is broken on my dishwasher and will not support the weight of the door. The door falls quickly to the down position and could possibly cause injury. the door links ...
Question about Kenmore Elite Washing Machines
...washer and hear it running water, where you place the detergent, it runs for about 30 seconds then stops and does nothing. I hear a real faint humming and lights are on. any ideas?? thank you broken ...
Question about Kenmore Elite Washing Machines
...washer stopped in mid cycle and is flashing F21. What do I need to do? Check the drain line for kinks or obstructions. Check the pump. Remove the hoses from the pump and use a flashlight to look into ...
1,394 questions posted
Usually answered in minutes!
3,839 Questions
0 Questions
69 Questions
45 Questions
20 Questions