remove the top panel and check the wiring. How do I remove the top panel? "Fdl" is a door latch error, just in case you haven't figured that out already. The following link explains how to replace it:
panel. Remove the 2 screws on each end on top. Remove the detergent drawer. Remove the torx screws behind the detergent drawer. The control panel will now snap off, pulling from the top and lifting up
Question about Kenmore Elite Washing Machines
...remove the top panel. The panel comes off by removing the three scews that hold it in place in the rear. With the screws removed, the panel will slide back, then lift off. This should give you access ...
...remove the top panel, console, toe panel, and the front panel. Removal of the front panel requires the removal of the door lock/switch assembly and the boot be separated completely from the front ...
...remove the top panel I see a screw unter the soap drawer I undo and still don't want to pull too hard. if you want to take the top panel off,there are 3 screws at the back of the machine,remove then ...
Question about Kenmore Elite Washing Machines
...from kenmore elite HE-3 front load washer? i have a kenmore elite HE-3 front loading washer and i removed the bottom 3 screws. i'm having an extremely had time removing the bottom panel. is there a ...
...remove outer clamp on door boot,pull panel from the end near were kick was,some of those machines have 3 more screws behind control panel? see how you get on and let me know . close Ireland bye for ...
panel. Remove the top panel by pulling it back, up, and off. Then remove all the screws going into the top of the control panel. Remove the dispenser drawer and remove the screws coming in through the
...on a kenmore front loader You remove the lower panel just under the door by removing 3 screws under the curved part 1 each corner and 1 center, once that is done you will have only min working
Question about Kenmore Elite Washing Machines
...isnt hard as it is fasted by a few screws in the back and you slide the panel back and then you will have access to the front panel mounting screws and remove those to remove the front panel. ...
1,394 questions posted
Usually answered in minutes!
3,839 Questions
0 Questions
69 Questions
45 Questions
20 Questions