...2010 dodge avenger I've taken all the black plastic screws out and there is a white screw that I can get out to remove the whole tail light. what can I do go to a partsstore-like ...
where is fuse for tail lights tail lights not working after removal/replacement of rear fascia There may be two locations, main fuse box for your vehicle will have one and they have them on the wire ...
...for a 2010 Ford Edge for the brake/turn/tail light? It is in your owners manual Surely you have one, since the vehicle is only a year old You could remove the burnt one & read what it is
remove 2010 toyota tail light assembly Either 2 screws on side of assembly when door is open or behind assembly on inside will b 3nuts u must loosen and assembly should fall out.. may have to slightly
...have to remove the plastic panel. It is mostly held by spring clips. You can see how to remove it at the link below. ...
...2010 dodge challenger there should be a fixture in the boot/trunk that holds the lights,that clips into a panel, find the clips that hold it in and release the lights fixture then you can change the ...
Question about Nissan Maxima
...2010 dodge avenger ? taken all the screws out of the light fixture front or rear cause ya may not have to remove any screws on headlight assembly's ya have to get to the back where the wires hook up ...
Question about Nissan Maxima
...tail lights and the fog lights don't want to turn off they only turn off when i remove the battery. I have checked the wiring and all the fuses and everything seems in tact light relay faulty, ...
...remove rear tail light lens Dodge 3500 See video... If you open the tailgate, you will see 2 screws inside the frame for the tailgate (underneath the strikers on either side). remove these and you ...
100 questions posted
Usually answered in minutes!
1,309 Questions
1,122 Questions
1,007 Questions
857 Questions
783 Questions