2008 Chrysler Sebring "rear seat" Questions

...seat all the way to the rear to access the front two bolts, then move the seat all the way to the front to access the rear two bolts. Don't forget to unplug any electrical connectors before removing ...

...seat to service the hydrualic pump system? pull up to remove the lower seat cushion. remove the bolts for the rear seat cushion the bolts are at bottom of rear seat frame.. lift it up to remove

...have to help it manually. Some said i need to pull my rear seats to check for a hydrulic leak, and add fluid. push hard in at the base of the seat then lift up. Why not get to the pump from the

How do you access rear side window Remove lower rear seat, and the remove side panel for access. You may need to take off seat back also

keys locked in the trunk of a 2003 sebring the car is unlocked trunk button will not operate without key in ignition remove rear seat to get access to trunk use spare key remove rear seat

...rear window defroster does not work. Could this just be a fuse needing to be replaced? your heater element in the seat went bad,the dealer will have to do this because the seat has come apart the ...

rear seat to budge. There is no gearbox. A motor runs a pump which moves the cylinders. You are probably low on fluid. Behind the rear seat is your motor/pump/reservoir combination. With the top down,

rear seat cushion, seat back and inner quarter trim panels. Pull up sharply on the seat cushion at the front about midway between the middle of the seat and the outside edges. The seat back is held in

...rear seat. The bottom cushion of the rear seat would pop out, there will be clamps at either side of the outer edge of the seat.  The rear seat back, can be removed by removing the seat belt ...

...rear wheel hub seems to be behind the seat or rear back panel.. its in the trunk area over the wheel. you have to remove the trunk liner panel and then you can access the strut mounting ...