Konica Minolta Bizhub C300 All-In-One Printer "7145 error codes" Questions

What are codes F-34 and F-35? These are heat sensor abnormality error codes in Konica Minolta 7222/7145/7135/7235/7228 models.You did not mention the model.

7145 KONICA COPIER, AND HAVE A ERROR CODE E-56-1. HOW CAN I RESET THE CODE? OR WHAT IS THE PROBLEM? I TRIED TO CONECCT THE FINISHER BUT WUEN I H CONECTED, THE ERROR CODE E-56-1 APPEARS this code means

...7145 error code 26-3 My copier has been in storage for about a year and now that I've plugged it in it gives me the error code listed above after it starts up. NOT SURE BUT YOU CAN GET SERVICE MANUAL ...

7145. It has error code I have a Konica 7145. It has error code F-36-1. I tried cutting the power completely and restart a number of times, but the code stays all the time, I can't even get a response

error code f35-6 on konica 7145 copier every time i try to turn on this machine,displays this error code,and i can't do anything because of this f36-5 error code.i will be so greateful if you can ...

7145-7222-7228-7235SM.pdf Usually, the hard disks are located where all the boards are, due to the fact that hdd needs to be connected with this boards and if the wires are longer, interferences might

...7145 error code F34-2 Konica Copier error code F-34-2 do this once code comes back replace the fuser continue reset couls cause fire ruining a perfectly good day To reset failure codes, perform the ...

error code F-35-1 in bizhub 7145 copier I have Konica Minota bizhub 7145 B&W copier just broke down. When I tried to turned it back on, I did not hear any starting motor sound, only showing Error ...

7145 F-51-2 Error I have a Konica 7145 copy machine that is producing an error of F-51-2 when I turn the unit on. I had a tech come out and told me that the control board is the problem. I replaced it

...7145 Fuser Error F34-2 Do You know the reset coded? You could go into service mode and reset error count normally to get into the service mode is the following depending on age of machine. Thanks ...