HP Compaq Presario SR1617CL PC Desktop "putting new ram" Questions

...NEW RAM UPGRADE TO BOOST FROM 1G TO 2G COMPUTER DOES NOT RECOGNIZE NEW RAM STILL SHOWS 1G. Make sure it is the correct ram for your computer. If you just added one ram chip then try swapping them and ...

new stick of RAM, make sure both clips are open (pushed down towards the ground). To remove RAM, just push those clips down in the same way. To install a new stick of RAM, push directly, straight down

...same result. Any help would be greatly appreciated. one of the ram sticks is bad test them by putting one in at a time if all ram checks out ok then ut ram slot is bad seek a new motherboard if ...

...new RAM out and putting it back in I went to install the old 256 MB's of RAM. But this time I heard a long beep coming from my Computer (about 5-7 seconds estimated.) I checked online and found out ...

...new memory in the old slot first. Let me know. Make sue you have the right memory that the motherboard supports.If it is supported it also depends what operating system you use eg:xp 32bit can only ...

new card. A 400 dollar card and a 800WATT power supply. Of course, you must also look at your processor and memory you have in this computer. Processor: At least a Core 2 Duo or Quad, Assuming Windows

new 500 HD and OS. I have also replace sempron processor with an Athlon 64 and upgraded from 512 2x256 memory ram to 4GB 4x 1GB PNY DDR RAM, also replaced 250W power supply with 400W. All help will be

new power supply in and now it turns on but no boot or screen just an everlasting beep every 3 seconds. what do i do? Common Beep Code Information:: http://h10025.www1.hp.com/ewfrf/wc/document?docname

...RAM can cause your computer not to start properly where you want to see a video signal. Make sure your graphics card is securely seated with no dust built up or in the socket if you remove your ...

...light is on behind tower though. what can it be? Could possibly be your power supply. unplug the computer and take out the ram and put them back in. If that doesn't work, get a new power