Question about Dishwashers
water is filling up but dont stops and start owerfloawing.Indicator lights are ok but durinig owerfllowing lights disapiered.Float switch is ok what stops water.Is it pressure switch?Thank you. ...
...Stop light must be blinking. If the Start/Stop light is not blinking, press and hold the Start/Stop button for at least 3 seconds to exit the cycle. The Start/Stop light should now be blinking. Press ...
Frigidaire PLD2560LCC1, starts, then stops My Frigidaire PLD2560LCC1 starts, then stops for no reason. After it stops, the Washing, Sanitized and Clean green lights are all blinking. I cut the power, ...
...light will stop flashing after the dishwasher drains (about 90 seconds). ? Press the pad once to start the dishwasher. Press the pad a second time when the dishwasher is running only if you wish to ...
Question about Kenmore Dishwashers
...light will not stop blinking. Have tried resetting it, but no luck. My Kenmore dishwasher has less then 60 uses and the clean light is now flashing and I'm unable to get the unit to work. I've turned ...
Question about Hotpoint Dishwashers
the d'washer just stops after about 2,3 mins with light flashing our hotpoint starts the cycle and within about 3 minutes it stops with the light flashing and nothing else. I pulled it out and noticed
...stop the lights go out for about a minute and then go back on and the "start/resume" light blinks. You can start it right back up by pressing the start button again, but usually stops again shortly ...
Question about Kenmore Dishwashers
...light will not stop blinking. Have tried resetting it, but no luck. If the clean light flashes 7 times, pauses then repeats... If the dishwasher doesn't sense a water temperature increase, it will ...
...light flashes i switc on dishwasher and it seems to start then light goes onto wash and the machine stops and green light flashes Hi LIANNEshaun, I'm Harvey the Master Plumber. Your problem is: you ...
...lights came on and then it went through a process of turning on and off all the lights then finally stopped. I pressed the start button and it seemed to be starting and running fine but then after a ...
25 questions posted
Usually answered in minutes!
18 Questions
13 Questions
17 Questions