Kenmore 7.5 cu. ft. / 212 liter Upright Freezer 24701 "voltage freezer compressor" Questions

...freezer has defrosted and red light is staying on do you have voltage at the compressor? if not you have an open circuit or bad t-stat. if voltage is present and compressor is not running you have a ...

...Freezer only hume's( elect) but will not start compressor. check the fan motor. Some -possible-faults - low voltage ( extension cord, not on a dedicated line ) - compressor drawing too much current - ...

...freezer warm ( due to compressor not turning on. cked for voltage at compresser, 0 volts, cked for voltage at power cord and relay have 120v. compressor is not open has reaistance for what get ohms ...

freezer you may be he\aring the fan motors run and not the compressor. I suggest you call a qualified and trustworthy repairman and have him look it over for sure. Short if that you'll need to feel of

freezer compressor clicks but will not start Which 3 n 1 hard start should I try? Depends on the HP rating of the compressor, also the voltage. Generally I find that even if a hard start works you are

...freezer cabinet when compressor comes on the voltage drops from 209 to 181 this is a brand new compressor in this unit It sounds like a power source problem. The longer the run from the circuit ...

freezer wiring diagram potential relay tripping A "potential" relay is a voltage controlled start component for the compressor. If your sure the potential relay is bad, not the start capacitor or a ...

...freezer has a bad EMBRACO compressor part # EGZ80HLP. Will an EGZS80HLP replace it ? Not cooling - Pops circuit breaker The answer to your actual question is--- check your LRA on compressor plate. If ...

freezer has just stop workin after it defrosted i left it of 24 hours turned it bk on dis morning and nothing it wont freeze or go cold n keep makin a poppin noise... do i need a new fridge frezzer or

...voltage to the compressor relay. if it is ok unplug the freezer and check for continuity at the start relay and overload. if it is open you have a relay or overload. if it is ok check for the ohms ...