...turns and immediately stops Bought a used treadmill it ran fine at their house, moved it got home and everything on console works you press start the belt turns and immediately stops Is the key in ...
Treadmill Turns on then immediately turns off see the video and fix it. You must test the c.breaker is o.k or faulty. God bless you
track needs adjustment I have the key. which way should I turn Hi, The best thing to do is to start it and turn one way or the other and watch the belt...you will know immediately if you are going the
Question about Exercise & Fitness
Pressure cooker 700 series...purchased 11 months ago, has worked very well until today. A bay leaf accidentally dropped on to the inside heating surface and I put the insert in an turned it on. The ...
J 440 treadmill belt moved all the way to left I noticed the belt was to the left, so I used the wrench and turned counterclockwise on the left and clockwise on the right. This has always worked in ...
Question about Nordic Track Exercise & Fitness
Turn on treadmill, display lights go and than immediately go out Arduino + U-MC 2100-WA Treadmill Motor Controller ... ? 5:16 www.youtube.com/watch?v=rAZ8FCzOuxE May 27, 2013 - Uploaded by Grant Brown
Question about Nordic Track Exercise & Fitness
i turn my treadmill on and it immediately goes full speed wont stop unless i pull the key out. no functions respond. That sounds like a motor control that is shorted out,the only thing you can do is ...
Question about Nordic Track Exercise & Fitness
...turns on then the circuit breaker immediately trips. I have tried other circuits but the same thing keeps happening. What could be causing this to happen ? Draining too much current for the breaker! ...
Question about Exercise & Fitness
immediately turns back off. Is there an easy fix to this? I tried adding another magnet to try to increase the power, but that did not work. If you wish to get some details; check the site linked here
Question about Exercise & Fitness
My healthstream treadmill started smoking in the bottom cover near the belt. It was turned off immediately. Now it will turn on but the belt won't move and an E3 error code comes up. Can it be fixed? ...
4 questions posted
Usually answered in minutes!
2 Questions
5 Questions
2 Questions
3 Questions
2 Questions