Gear shifter is not locking in any gear. Shifting back to lowest The gear shifter just broke down. It is shifting gear when pressed but locking into any gear. Instead after leaving shifter, gear is ...
ratchet "pawls" (or catches) has stuck "open", and is unable to "catch" on the rotating part that spools (or pulls) the shift cable that is connected to the derailleur. This is why the lever has very
...ratchet allowing it not to shift. I have lubed it, blown compressed air into it with no luck. Any solution? Peter My guess is the shift cable has slipped, only allowing you the top end of the rachet ...
shift 1Remove the bolts and nuts that secure the center console around the gear shifter with a 1/4-inch drive ratchet, a metric socket and a Phillips head screwdriver. This will expose the rubber boot
...shift lever itself has a kind of friction clutch built into it to keep the cable from slipping back and shifting to a higher gear by itself. You might be able to loosen that clutch a little, ...
Ultegra 6703 skipping shifts: Ultegra skipping shifts: Identical problem, but affects both of my 6703 shifters, As Kris_bebbing reports, they both skip moving to smaller ring or sprocket. Intermittent
15 questions posted
Usually answered in minutes!