Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum "open cover motor" Questions

...open the motor compartment. please help thanks Use a flat blade screwdriver, The dusy compartemnt door will come off by pushing it back, it just pops out. Then the rear top cover is held on by a tab, ...

...motor cover removed? How is the motor cover of an Electrolux z4494 removed? Two screws at the front, accessed by opening the dust bag lid. Two screws at the rear accessed by prising off the on/off ...

...open the cover to change the motor filter on my Electrolux Epic Series 6500 sr canister vacuum. There is not a replaceable motor filter inside the body of the vacuum. There is an exhaust filter under ...

...cover tpyou will be able to see into the fan of the lower direct air motor to remove the obstruction. If it is in too far. You may have to pull the motorand open up the fan. This is not a hard thing ...

...open the vacuum at all. Is the cover press fit so that I can just try to slip a screw dreiver in and pry it off? What you need to do is take it apart and look for any carpet peices dug up in there ...

open the motor compartment in the canister so I could work on the motor. I don't see any screws and it's difficult to pry the canister apart. Thanks. The top piece near the back comes off, use a screw

...open the motor cover. Are there some hidden screws? Liquid plus electrical parts always ends up with the electrical parts losing. Juices, although they will dry, will leave behind a sticky residue. ...

...open body to access motor for repairs. Tricky but you need to lift the slider cover off that adjust Min & Max speed and you will find 2 screws underneath, then you need to slowly take of plactic ...

open the back part where it is stored. The motor / cord compartment cover must be removed to access the cord reel. There are four screws that hold the cover to the chassis. Two of the screws are found

...open up the canister. I took off the two screws under the hood, but there appears to be two screws under the bottom by the wheels holding the top and bottom together. The screws are in two deep, thin ...