display type didn't get changed to VGA out only. look at your function keys (usually top one or two rows ) and look for the key that has a pc/monitor icon. with the machine powered up and connected to
...machine again. If it powers and display is shown it would suggest a faulty drive, otherwise replace drive. Next step would be optical drive this is usually held in place by a single screw on the ...
...machine is not connected to mains power. In any case you can adjust the screen brightness. To do this you should be able to use the function keys together with the Fn button. You should find two ...
...display back on-line. The switch in question is in the hole just below and to the left of the touchpad. Simply inserting a screwdriver is enough to make/break the contacts. I suspect it gets filled ...
Question about Dell LATITUDE Computers & Internet
...Display Bezel, and mounted at the bottom of the LCD screen assembly.Primer:An LCD screen cannot produce light. It needs an additional light source.A Backlight is the additional light source.A ...
...machine. Technology today makes most of the innards obsolete by time you've had a computer 3 yrs. My own take and strictly my own choice is to therefore never buy expensive computers. Unless, of ...
Question about Dell LATITUDE Computers & Internet
...machine, and the graphics chipset, it means replacement of the motherboard.(Cost of replacing graphics chipset, versus motherboard replacement, a motherboard replacement may prove to be more cost ...
140 questions posted
Usually answered in minutes!
2,767 Questions
482 Questions
402 Questions
362 Questions
368 Questions