Kenmore 80882 Microwave Oven "fuse holder melted" Questions

...fuse holder is not too loose. With the power unplugged and a fuse in the holder, see if you can rotate the fuse in the holder with just your thumb and fingertip. If so, the holder is loose and will ...

...the oven the fuse gets hot and the fuse melts inside . sometimes you can get away with a little contact cleaner on the holder and a new fuse . other times you will need a new fuseholder too. good ...

fuse holder got fuse hot and melted fuse so now unit dead. Must check fuse first and if bad replace and try, if it blows as soon as it tries to heat probably bad inverter. If it works for a long while

...fuse holder in the unit it can make the fuse go bad by betting hot and melting so you could have either a bad or weak fuse holder or bad wire connections to the fuse holder. These companies are using ...

...fuse holder will cause the fuse to melt open after so long. With the microwave unplugged, if you can easily turn the fuse with your thumb & forefinger while it's in the holder, it has overheated ...

...fuse holder by seeing if you can twirl the fuse with your bare fingers while it's in the holder. If so, then it is too loose and the holder must be replaced. You cannot just squeeze it tighter with ...

...the fuse from the holder, put one lead on each side of fuse. meter indicates 0.00 fuse is good, meter reading does not change fuse is bad. Electonis fuses can only be checke with a meter not

...has to be removed and the fuse replaced with the same type and amperage. Pay attention to the fuse holder to make sure it isn't burnt or corroded causing a poor connection which overheats the

...fuse holder, or even an intermittent fuse. You or a friend should do a continuity test on the fuse while it's in the holder (with the microwave unplugged, of course) then take it out and put it back ...

into the unit you will see a white fuse in a black plastic fuse holder. Look carefully. I had to replace the melted fuse holder as well. Radio shack has the fuses and holders. remove front top cover??