...difference is that the round seat fits a round bowl and the elongated seat fits an elongated bowl. I recommend that you return the elongated seat and exchange it for a round toilet seat. good ...
...valves eventually fail, and toilet seats do break. Pick out a replacement that suits your fancy, unbolt the old one from below, and install the new one. Don't overtighten as the porcelain could
bowl of the toilet and feel for a rather large wing-nut bolt on each side of the toilet. You must hold these with your hand and tighten the screws with a screwdriver. If you don't hold these wingnuts,
toilet seat in place. .Reach under the screw there will be a plastic nut. Hold if while you losen the screws with the Screwdriver....remove and replace seat. ... install screws and plastic nuts again.
...bowl like this? Sorry for problem with new toilet. You say water is leaking out of the bowl? Toilets have 2 parts: 1) Tank: where water is stored for the flush and is sealed with a flapper. 2) Bowl: ...
...to access the special valve that comes with the Washlet. ed The water supply line on your Aquia toilet was installed before the tank was mounted to the bowl and the tank must be removed to change
Question about Kohler Home
...install an auto detergent dispenser onto existing toilet ci I want to dispense automatically a small amount of detergent into the water in the exiting toilet cisten at every flush. Thank you for ...
...is only $4.99 and absorbs the fall of the toilet seat and eliminates loud clanks. They're non-absorbent, have an easy stick-on installation, and are permanent but removable. ...
...install a toilet for the first time Things needed; set of johnnie bolts, wax ring, water supply tube, open end wrenches. insert the flat head of the johnnie bolts into the groove of the floor flange ...
2 questions posted
Usually answered in minutes!
52 Questions
17 Questions
15 Questions
11 Questions